Cheat sheet on Plantronics Voyager (510)

I started this off as writing about the vairous light combinations, but then ended up writing the whole thing for my reference...

So, the section below covers all the lights I've come across specifically on Voyager 510:

1. Constant Red : When the Voyager is plugged in and is being charged.
2. Constant Blue: When the Voyager is plugged in and is finished charging.
3. Red Blue blinnking/flashing: Voyager is ready for pairing. This happens when you keep the + VOL and CALL button on the boom pressed.
4. Blue blinking/flashing: Voyager is working, paired and online
5. Red blinking/flashing: Battery low

Other things which you can do with the headset are:

1. Turn on: keep the black power button pressed for three seconds. Blinks blue once and that is the indication that its turned on.
2. Turn off: keep the black power button pressed for three seconds. Blinks red once and that is the indication that its turned off.
3. Disable blue blinking when paired/online: Turn off and then turn on by keeping the +VOL and black POWER button pressed for three seconds. (apparently this doesn't work in my case, so I might be returning it)
4. Enable blue blinking then paired/online: Repeat the above process (#3)
5. Reset the headphone if keys stop responding: Press  - VOL and POWER button together for three seconds.
6. Redial last number: quick double click on the CALL button
7. Accept the call: when the headset is ringing, press the CALL button to accept it
8. Pass the call to the phone from the headset: Long press on the call button until you hear two beeps
9. Take back the call from the phone to the headset: Press the CALL button
10. Cancel/End the call: Press on the CALL button
11. Reject the call: When the headset is ringing because of an incoming call, long press the CALL button to reject the call.